FOSTEX DAT D15 - 900 €

FOSTEX DAT D15 DAT pro RS422 Time code D15 Professional DAT Recorder Features
• Recording Format:
• - IEC DAT Standard Part 1
• - IEC DAT Standard Part 5 (installed Model 8335) 
• Recording Tape: Digital audio tape
• Number of Channels: Audio x 2
• Recording Time: 120 minutes (with 120-minute tape)
• Head Composition: Cylinder 2-head 30mm diameter, 2000rpm
• Error Correction: Double Encoded Reed-Solomon Code
• Sampling Frequency: 48kHz, 44.1kHz
• A/D Converter: 18-bit Delta Sigma 64 times oversampling
• D/A Converter: 20-bit Delta Sigma 128 times oversampling
• Quantization: 16-bit linear 
• Dimensions (approximate): 19 x 5.9 x 14.6 in. (482 x 150 x 371 mm)
• Weight (approx.): 19.8 lbs. (9 Kg) 
• Mechanical
• Motor Construction: 2DD4 motors
• Tape Loading Method: Tray method
• Fast Wind Speed: Maximum 180 times from normal speed
• Fast Wind Time: Approximately 60 seconds (with 120-minute tape)
• Search Speed: 1/2, 1, 2, 3, 5, 9, 16 times
• RAM: 8 MBit, 5sec. (48 kHz max.)
• RAM Search Speed: 0-1 times 
• Electrical
• R/P Frequency Response: 20Hz - 20kHz
• S/N Ratio: More than 92dB
• Dynamic Range: More than 92dB
• THD: Less than 0.05% (1kHz, +4dBu)
• Channel Separation: More than 80dB (at 1kHz)
• Wow & Flutter: Unmeasurable
• Reference Record Level: -20dB/-18dB/-12dB (selectable) (defauls: -12dB) 
• Input/Output
• Analog Audio Input (balanced) Connector: XLR-3-31 type x 2 (pin 2 Hot)
• Reference Input Level: +4dBu
• Input Load Impedance: 20kOhms or more 
• Analog Audio Input (unbalanced) Connector: RCA pin type x 2
• Reference Input Level: -10dBv
• Load Impedance: 10kOhms or more 
• Analog Audio Output (balanced) Connector: XLR-3-32 type x 2 (pin 2 Hot)
• Reference Output Level: +4dBu
• Load Impedance: 600 Ohms or more 
• Analog Audio Output (unbalanced) Connector: RCA pin type x 2
• Reference Output Level: -10dBV
• Load Impedance: 10kOhms or more 
• AES/EBU Digital Audio Input Connector: XLR-3-31 type x 1 (pin 2 Hot)
• Format: IEC 958 part 3 (AES/EBU) 
• S/PDIF Digital Audio Input Connector: Optical x 1
• Format: IEC 958 Part 2 (S/PDIF) 
• AES/EBU Digital Audio Output Connector: XLR-3-32 type x 1 (pin 2 Hot)
• Output Format: IEC 958 part 3 (AES/EBU) 
• S/PDIF Digital Audio Output Connector: Optical x 1
• Output Format: IEC 958 part 2 (S/P DIF). RAM playback is not available 
• Headphone Output Connector: Stereo 1/4 in. phone jack x 1 (6 mm diameter)
• Maximum Output Level: 100mW (at 32 Ohms)
• Output Load Impedance: 8 Ohms or more   • Optional
• Optional timecode/sync capabilities (Model 8335 Timecode/Sync Card)
• Optional RS-422 serial interface (Model 8336 RS-422 Serial Card)